Duerkopp Adler 550-767 Instrukcje Operacyjne

550-767Gestalteter Arbeitsplatz fürSeitenairbag - SollreißnahtEngineered work station forside airbag tearing seamBedienanleitung / Operating instructi

2.6 Adjusting working heightThe working height is adjustable betw een 685 mm and 1085 mm(measured to the upper edge of the table plate).The working he

3. Electrical connectionCAUTION:All work on the electrical equipment of the sewing unit may only becarried out by qualified electricians or other appr

3.3 Checking the positioningThe sewing machine should be positioned with the thread lever at topdead centre.The proximity switch 2 is attached to the

3.4 Setting parameters–Connect the operating panel 1 to the socket 2 and set theparameters in accordance with the table.291 2

4. Pneumatic connectionThe pneumatic system of the sewing unit and auxiliary equipment mustbe supplied with absolutely dry compressed air.The supply p

5. Lubrication5.1 Topping up with oilTop up the oil reservoir using DA-10 lubricating oil or only or anequivalent oil with the following specification

5.3 Oiling wicks and feltWhen setting up and after protracted periods of disuse the wicks andfelts in the sewing head should be saturated with a littl

6. Sewing testWhen setting-up is complete a sewing test must be carried out.CAUTION: danger of injury!The needle thread and hook thread must be thread

Notes:14

Alle Rechte vorbehalten.Eigentum der Dürkopp Adler AG und urheberrechtlich geschützt. Jede, auch auszugsweiseWiederverwendung dieser Inhalte ist ohne

ForewordThis instruction manual is intended to help the user to become familiarwith the machine and take advantage of its application possibilities in

General safety instructionsThe non-observance of the following safety instructions can cause bodily injuries or damages to the machine.1. The machine

Contents Page:Part 2: Installation Instructions, Class 550-7671. Items delivered ... 22. General and trans

1. Items deliveredWhat items are supplied depends on your order. Before setting-upplease check that all the required components are present.–Basic equ

2. General and transport packingCAUTION:The sewing unit may only be set up by trained specialist personnel.2.1 Transport packingThe transport packing

2.3 Transport within customer premisesFor internal transport the sewing machine and the control unit (PC)must be lifted and moved by a suitable vehicl

2.5 Mounting the reel standThe structure and position of the reel stand 3 can be seen in theillustration.–Fit reel stand 3 in the hole of the table pl