Duerkopp Adler FLP Series Additional guide Instrukcja Obsługi Strona 30

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 74
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 29
Operation
Operating manual 281 Version 06.0 - 05/201328
5.7.1 Adjusting the needle thread tension
Main tensioner
The main tensioner (2) determines the normal tension during
sewing.
Figure 12: Adjusting the needle thread tension
Correct setting
The main tension should be set as low as possible. The thread
interlacing should be exactly in the middle of the material being
sewn.
Faults due to excessively high tension
Crimping
Thread breakage
Adjusting the main tension
To increase the tension:
Turn the adjusting wheel (2) clockwise.
To reduce the tension:
Turn the adjusting wheel (2) counterclockwise.
Opening the needle thread tensioner
The main tensioner is automatically opened when the thread is cut.
(1) - Pre-tensioner (2) - Main tensioner
Przeglądanie stron 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 73 74

Komentarze do niniejszej Instrukcji

Brak uwag